FinUniversity Electronic Library

     
?

Details
Card Table RUSMARC

Annual International Conference on Materials Science and Environmental Engineering. Materials in environmental engineering. — 1 online resource (1,406 pages) — <URL:http://elib.fa.ru/ebsco/1614226.pdf>.

Record create date: 12/6/2017

Subject: Environmental engineering — Congresses.; Environmental engineering.; TECHNOLOGY & ENGINEERING / Environmental / General

Collections: EBSCO

Allowed Actions: –

Action 'Read' will be available if you login or access site from another network Action 'Download' will be available if you login or access site from another network

Group: Anonymous

Network: Internet

Document access rights

Network User group Action
Finuniversity Local Network All Read Print Download
Internet Readers Read Print
-> Internet Anonymous

Table of Contents

  • Keynote Speech I. Strategies for Improving Hydropower Development
  • Keynote Speech II. Biotemplated Mesoporous Materials for Wastewater Treatments
  • Keynote Speech III. Design of Hard and Superhard Nanocomposites for Harsh Environment
  • Keynote Speech IV. Numerical Simulation of Slag Corrosion Behavior of Lightweight Refractories for Refining Ladles
  • Keynote Speech V. Precision Plastic Forming of Large Complex Component of Ti-Alloy
  • Study about the Landslide Deformation Forecast Model Based on Kalman Filter Method and Taylor Seris and Material Properties
  • Effects of Machining Process and Heat Treatment on the Mechanical Properties and Microstructure of TB2 Titanium Alloy Strip
  • Study on Compound Characteristics of Oleic Acid, Glycerol and Organic Ester in Grinding Fluid
  • Novel Room-Temperature Molten Salt Based on Chlorine Chloride with Hydrogen Bond Donors
  • Study on Organic Modification of Aluminum Powder Coating
  • Study on Material of Exothermic Insulation Riser Sleeve
  • The Efficiency Calculation of Cobalt Oxide for Artificial Photosynthesis with Exponential- Doping
  • Microscale Hierarchical Three-Dimensional Flowerlike CuO: Synthesis, Characterization, and its Supernormal Photocatalytic Activity under Visible Light Irradiation
  • The Distribution Behavior of Phosphorus at Non-Equilibrium Condition Simulating the Casting Ladle
  • Effects of Zr Addition on the Microstructure and Mechanical Properties of AlCoCrFeNiZrx High-Entropy Alloys
  • Research and Preparation of Super Hydrophobic and Self-Cleaning PVDF Membrane
  • Preparation and Characterization of TiB2 Coatings with Ultra-Low Residual Stress
  • Crystal Structure and Microwave Dielectric Properties of Ca [(Li1/3Nb2/3)0.9Zr0.1]O3-δ−xTiO2 ceramics
  • Mechanism of Mechanochemical Reactions in Magnesium-Aluminium Layered Double Hydroxides Systems
  • Deposition of Diamond Films on Complex Cutting Tools by Hot-Filament Chemical Vapor Deposition
  • The Crystal Unit Model of CsI(Tl) Film with Hexagon Microcolumns and Its Conversion Factor to X-Ray
  • Effect of Ion Etching on the Surface Morphology, Structure and Adhesive Strength of the TiN Coating
  • Influences of Photocatalytic Activity by TiO2 Doping with Graphene Oxide and Lanthanum on the Carrier of Cenosphere
  • Synthesis and Luminescence Properties of Eu3+-Doped NaTb(MoO4)2 Hierarchical Microcrystals
  • PtxNi/meso-Al2O3 (x = 0.60–2.07): High- Performance Catalysts for the Hydrogenation of N-Butanal at Low Temperatures
  • Hysteretic Behavior of CFT Columns with Semi- Rigid Base Connection under Different Loading Modes
  • Behavior of Liquid Phase Generation of High Phosphorus Oolitic Hematite during Sinter
  • Influence of the UUV Body on the Performance of the Propeller
  • Piezoresistivity of Polyethylene Terephthalate Nickel Powder Composite
  • Preparation of Ti-Cu Alloying Surface Layer on Ti6Al4V Substrate via Friction Stir Processing for Flame-Retardant Performance
  • Failure Analysis of Escalator Step Induced by the Bolt Surface Defects
  • Surface Wear Mechanism of Escalator Step Chain: A Failure Analysis
  • Toxicity Reduction Mechanism of ZnO NPs during Sludge Vermicomposting Process
  • A Nanocomposite Film of Polyoxometalate and TiO2: Preparation, Characterization and Photochromic Property
  • Application of Inductively Couled Plasma- Mass Spectrometry to the Speciation Analysis of Rare Earth Elements in Ion-Adsorption Rare Earth Ore
  • Electronic Structure of Cu2ZnSn1-xGexS4 New Energy Materials Probed by Soft X-Ray Absorption Spectroscopy
  • Preparation and Performance of a Chitosan/TiO2 Composite Film by Lyer-by- Layer Method
  • Facile Route to Synthetize Lanthanum Doped Titanium Dioxide Films for Improved Photocatalytic Performance
  • Contact Property of Au on p-InP
  • Effect of Polyethylene Oxide Concentration on Separation Performance of PVDF Hollow Fiber Plasma Separation Membrane
  • Influence of Phosphate Concentration and PH Crystallization of Magnesium Ammonium Phosphate (MAP)
  • Microstructure and Corrosion Resistance of CrMoVNbFex High-entropy Alloys
  • Finite Element Analysis of Composite Shear Walls with Double Steel Plates and Filled Concrete for a Nuclear Island Structure under In-Plane Loading
  • Exothermal Combustion Synthesis of the Composites TiB2/Ni from Ni–Ti–B System
  • Research on Wetting Characteristics of Normal Acid, Alcohol and Alkane on Surface of Monocrystal Silicon
  • Effect of Modified Argon Oxygen Decarburization (AOD) Stainless Steel Slag on Cementitious Properties
  • Optimization of structure Design of Physical Vapour Transport Furnace for Silicon Carbide (SiC) Crystal Growth via Numerical Simulation
  • Thermodynamical Analysis of the Spontaneous Combustion of FeS
  • Cause and Prediction Model of Low Infrared Emissivity for Resin/Flaky Metal Composite Coatings
  • Synthesis and Characterization of Modified Carbon Aerogels
  • A Review on the Application of Photocatalytic Materials
  • The Preparation of Nano ZnO/PVC and the Photocatalytic Degration of Waste Water from Seafood Processing
  • Efficient Adsorptive Removal of Arsenic from Water by Titanium-Based Metal-Organic Frameworks (MIL-125)
  • The Research of SVG in Three-Phase Four-Wire Power System
  • The Application of CDMA Technology in the Measurement of Antenna Array
  • Synthesis and Bactericidal Properties of MgO/TiO2 Nano-Composites
  • Effects of Assisting Agents Concentrations on Energy Consumption during the Electrokinetic Treatment of Contaminated Kaolin
  • Development of a Solid State pH Sensor Based on Electrodeposited Iridium Oxide Films for Water Quality Detection
  • Simple Fabrication of ZnO Hierarchical Structures with Enhanced Photocatalytic Activity
  • Enhanced Cycling Stability of Multi-Cations Doped Spinel Lithium Manganese Oxide for Rechargeable Lithium Batteries
  • Review on the Applications of Phase Change Materials (PCMs) for Building Envelopes
  • Damage Analysis of Cast Iron Specimen with Different Crack Forms
  • Study on the Performance of a High-Pressure Water Jet Dust Collector in a Powder Feeding Port of Explosive Sites
  • Self-Assembled Grapheme / Carbon Nanotube Fibers as Electrodes for Super Capacitors
  • Fatigue Life Prediction of a Kind of Frequentlyused Bolt under Random Excitations
  • Research on Development of Armor Protection Materials and Technology
  • Cold forming Cracking Reason and Solution Method of SS400 Hot Rolled Steel
  • Effect of Flow Rate of Cooling Water on the Interfacial Heat Transfer Coefficient between Modular Water-Cooled Mold and Casting
  • Study on High-Absorption Chrome Tanning Technology Assisted by CO2 Low Temperature Plasma Treatment
  • Simulation of Q345 Steel Billet Solidification Microstructure in Continuous Casting Based on Matlab
  • Preparation and Properties of Neopentyl Glycol/Epoxy Resin Composite Phase Change Material for Thermal Energy Storage
  • Hysteric Property Analysis for Semi-Rigid Base Connection of Concrete-Filled Square Steel Tubular Columns
  • An Adaptive Harmonic Current Detection for Improving the Power Quality in Power Grid
  • Paper Fiber Paper-Based ZnO Piezoelectric Nanogenerator for Self-Powered Energy Scavenging
  • Fabrication of Super-Hydrophobic Surface with Micro- Nano-Structure on Brass Substrate by Chemical Etching and Surface Modification
  • Preparation Technology and Experimental of Hydro-Thermal Method on Surface Modification of Biomedical Titanium
  • The Co-Pilot Position of Vehicle Noise Quality Prediction Based on SVM
  • Application of Aramid Fiber in Printed Circuit Board
  • Online Intelligent Sorting Method of Gold Ore based on LIBS Technology
  • Rapid Decolorization and Mineralization of Congo Red Using Fe78Si9B13Amorphous Alloy by Photo Fenton-Like Process
  • Preparation of Ce, N-Codoped Mesoporous Titania Photocatalyst with High Photocatalytic Activity under Visible Light
  • Preparation of TiO2/AC Composite and Characterization of Its Photocatalytic Activities
  • Electrocatalytic Oxidation Degradation of Reactive Red 2
  • Nanoscale Fe0 Supported on Three- Dimensional Graphene for the Removal of Methyl Orange from Water
  • Study on the Optimal Extraction of Coal Resources under the Constraint of Ecological Environment
  • Research on the Stability Calculation and Treatments of the Liyu Landslide in Zhuzhou City, Center Hunan Province
  • Procurement Cost Control of New Energy Vehicles Manufacturing Enterprise under Supply Chain Management
  • Domino Effect Index for Chemical Plants Based on Fishbone Analysis
  • Xinjiang Wind Power under “the Belt and Road Initiatives” Facing the Opportunities and Challenges
  • Analysis of the Fuel Efficiency of Airport End- Around Taxiway
  • Spatiotemporal Analysis on Pesticide Using in different Agriculture Lands over China
  • Policy Analysis and Capability Evaluation of China’s Cities in Response to Climate Change
  • Analysis of the Influence of Environmental Conditions on Individual SEFAE Rocket
  • Residual Characteristics of Organochlorine Pesticides in Four Kinds of Plants in Qingshitan Reservoir Region
  • Application and Research Progress of Toxicity Test of Daphnia Magna
  • Literature Mining-oriented Risk Management of Climate Change
  • Economic Evaluation of Renewable Energy Saving Technology Based on Analytic Hierarchy Process and Data Envelopment Analysis Method
  • Study on Modified Zeolite for Absorption of Fluoride in Water
  • Removal of Heavy Metal Ions from Aqeous Solution Using Bottom Ash as an Adsorbent
  • Research Progress of N2O Production in Different Wastewater Treatment Processes
  • Application of Alternative Environmental Protection Leather in Clothing
  • The Application of Green Environmental Protection Material in Clothing Design
  • Full-Flow Balance Analysis of Copper in Municipal Wastewater Treatment Plant of Hardware Electron-Mechanical Industrial Area
  • Study on Biological Treatment -Fenton - Oxidation Treatment -Biological Treated Landfill Leachate
  • Normal Section Bearing Capacity Test on Columns Composed by Fine Slag Aggregate Concrete
  • A Nonlinear Rheological Model for Rocks Considering the Tertiary Creep Stage
  • Construction of Multilayer Geo-Metadata Management System
  • Automobile Body Shop Optimization Design of Displacement Ventilation
  • The Research Progress of Polycyclic Aromatic Hydrocarbons Processing Technology in Coking Wastewater
  • Experimental Investigation on Flexural Properties of Sisal Fiber Reinforced Foam Concrete
  • Reservoir Modeling Constrained by Geological Conceptual Patterns of DC Oilfield in Llanos Basin
  • Numerical Simulation of Mold Surface Built-up Welding Temperature Field Based on ANSYS
  • Adsorption of β - HCH on Constructed Wetland Substrates
  • Structure and Spatial Distribution of Greenhouse Gas Emissions from Livestock and Poultry Manure Management
  • Study on Assimilable Organic Carbon (AOC) and Influencing Factors in Northern Living District Water Distribution System
  • A New Magnetic Pb (II)-Imprinted Polymer as a Highly Selective Sorbent for Preconcentration and Determination of Lead Ions in Wastewater Samples
  • Analysis on the Characteristics of Smog Pollution in the Urban Centre of Chongqing Municipal
  • Remote Sensing Monitoring Analysis of Typical Islands in Paracel Islands
  • The Structural Character and Optimal Design of Canal Aqueduct
  • Different Aqueduct Structure Make and Design
  • Liquefaction Technology of Rice Husk in Polyhydric Alcohols
  • Study on Engineering Example of Risk Based Inspection and Verification of Acoustic Emission Inspection for Storage Tank Group
  • Experimental Setup for Boron Meter Accuracy Analysis in Nuclear Reactor Environment
  • Effects of Material Dispersion on Heat Transfer Analysis of Integrated Thermal Protection Systems
  • Dust Pollution Emission Characteristics and Dust Suppression Effect of Porous Windbreak and Large Strip Warehouse Based on Wind Tunnel Experiments
  • Removal of Cadmium, Iron and Sulfate from Synthetic Acid Rock Drainage Using Metal- Tolerant Sulfate Reducing Bacterial Sludge
  • Measures to Prevent Subsea Wellhead Instability for Deepwater Drilling
  • Simultaneous Analysis of Methanol, Ethyl Acetate and Fusel Oil in Wine
  • Influence on Wetting Performance by Polarity Difference between Organic Acid and Organic Alcohol
  • Evaluation and Application of Poverty Index Water Based on Principal Component Analysis
  • Research Progress on Degradation of Polycyclic Aromatic Hydrocarbons in Cooking Flue Gas
  • Measurements of Contact Angles for CO2- Brine-Berea Sandstones System at Reservoir Conditions
  • The Numerical Simulation of the Surface Settlement and the Pile Horizontal Displacement Caused by the Foundation Pit Dewatering
  • A Study on the Influence of Integrative Structure Combined with Subway Station and Underground Passage under Dynamic Load of Subway Train
  • Research on Three-Dimensional Topographic Characteristics of Tensile Cement Stone Crack Surface
  • Diurnal Fluctuations in Oxygen Release from Roots of Phragmites Australis in Constructed Wetland Systems
  • Different Detection Methods for HPLC Analysis of Fatty Acid Methyl Esters in Biodiesel
  • Measurement and Analysis of Sound Absorption Coefficient by the Method of Reverberation Chamber and Impedance Tube
  • The Influence of Boundary Conditions on Sound Field in Long Space
  • Two Methods of Measuring Reverberation Time and Sound Absorption Coefficient in Reverberation Room
  • Investigation of Heat Transfer of a Square Impinging Air Jet on a Flat Surface using Thermochromic Liquid Crystal Sheet
  • Drying Behavior of Fluidized Bed Dried Peppercorns

Usage statistics

stat Access count: 0
Last 30 days: 0
Detailed usage statistics