Card | Table | RUSMARC | |
Materials research proceedings ;.
|
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
Finuniversity Local Network | All | |||||
Internet | Readers | |||||
Internet | Anonymous |
Table of Contents
- front matter
- Table of Contents
- Preface
- Organized on behalf of:
- Committees
- Sponsors
- 1
- Mechanical Properties Investigation of Composite Sandwich Panel and Validation of FEM Analysis
- Introduction
- Methods
- Results and Discussion
- Conclusion
- References
- Mechanical Properties Investigation of Composite Sandwich Panel and Validation of FEM Analysis
- 2
- 24h Creep Test of PE1000 Material at Elevated Temperatures
- Introduction
- Experimental research
- Static test results
- Creep test results
- Conclusions
- References
- 24h Creep Test of PE1000 Material at Elevated Temperatures
- 3
- Propagation of Failure in Adhesive Joints between CFRP/GFRP Beams Subjected to Cyclic Bending
- Introduction
- Specimen Preparation
- Fatigue Test
- Estimation of Destructive Loads Level with Mathematical Model
- Calculation of Destructive Loads Level with FEM Simulation
- Investigation of Epoxy Fracture Type by Microscope Usage
- Summary
- References
- Propagation of Failure in Adhesive Joints between CFRP/GFRP Beams Subjected to Cyclic Bending
- 4
- Corrosive and Mechanical Experimental Tests for Selected Stainless Steel Pipes
- Introduction
- Corrosion of Stainless-Steel Samples
- Bending Tests for Corroded Tube Samples
- References
- Corrosive and Mechanical Experimental Tests for Selected Stainless Steel Pipes
- 5
- Investigation on Microstructure and Mechanical Properties of AA 2017A FSW Joints
- Introduction
- Experimental procedure
- Summary
- References
- Investigation on Microstructure and Mechanical Properties of AA 2017A FSW Joints
- 6
- Analysis of the Influence of Mechanical Couplings in Laminate Beams on the Adherence of the Assumed Boundary Conditions in the DCB Test Configuration
- Introduction
- Parameters of tested beams
- Numerical modeling technique
- Results and discussion
- Summary
- Acknowledgements
- References
- Analysis of the Influence of Mechanical Couplings in Laminate Beams on the Adherence of the Assumed Boundary Conditions in the DCB Test Configuration
- 7
- Comparison of Different Methods for Determination of Delamination Initiation Point in the DCB Test on Coupled CFRP Composite Laminates
- Introduction
- Test specimens
- Experiment
- Initiation criteria
- Calculation methods
- Results and discussion
- Acknowledgments
- References
- Comparison of Different Methods for Determination of Delamination Initiation Point in the DCB Test on Coupled CFRP Composite Laminates
- 8
- Experimental and Numerical Examination of the Fastening System’s Rail Clip Type SB-4
- Introduction
- Experimental investigations
- Numerical simulations
- Summary
- References
- Experimental and Numerical Examination of the Fastening System’s Rail Clip Type SB-4
- 9
- Application of the Photoelastic Coating Technique in Car Suspension Failure Analysis
- Introduction
- The object and measurement method
- The measurements procedure
- Analysis and results
- Summary
- References
- Application of the Photoelastic Coating Technique in Car Suspension Failure Analysis
- 10
- Local Plastic Instabilities of Perforated Thin-Walled Bars – FEM Modelling and DIC Verification
- Introduction
- Description of elements used for numerical and experimental tests
- Description of experimental tests and obtained results
- Summary
- References
- Local Plastic Instabilities of Perforated Thin-Walled Bars – FEM Modelling and DIC Verification
- 11
- Fatigue Crack Growth Rate in Long Term Operated 19th Century Puddle Iron
- Introduction
- Material Investigation
- Conclusions
- References
- Fatigue Crack Growth Rate in Long Term Operated 19th Century Puddle Iron
- 12
- Modeling of Neck Effect in Cylindrical Shell
- Introduction
- General formulation of cylindrical shell
- Results
- Summary
- Acknowledgments
- References
- Modeling of Neck Effect in Cylindrical Shell
- 13
- Selected Aspects of Stand Tests for Prototype Floating Bridge Joints
- Introduction
- Stand for laboratory tests of the joint
- Research results
- Summary and Conclusions
- Acknowledgement
- References
- Selected Aspects of Stand Tests for Prototype Floating Bridge Joints
- 14
- Strain Research of Floating Bridge Side Joints in Lab Loading Tests
- Introduction
- Object of the research
- Results of the research
- Conclusions
- Acknowledgement
- References
- Strain Research of Floating Bridge Side Joints in Lab Loading Tests
- 15
- Experimental Study into the Torsional Friction between AGV Wheel and Various Floors
- Introduction
- Materials and methods
- Results and discussion
- Summary
- Acknowledgement
- References
- Experimental Study into the Torsional Friction between AGV Wheel and Various Floors
- 16
- Issues of Load Identification Using an Integrated Forces and Torques Sensor
- Introduction
- The concept of a sensor for measuring of force and torque
- Calibration of six-axis load sensor
- Protection of strain gauge sensor
- Tests of multi-axis load sensor during normal operation
- Summary
- Acknowledgement
- References
- Issues of Load Identification Using an Integrated Forces and Torques Sensor
- 17
- An Integrated Application to Support the Implementation of Measurements and Data Analysis
- Introduction
- Requirements for a measurement software
- The concept of integrated measurement application
- Software functionality tests on a laboratory stand
- Conclusions after preliminary tests of the developed measurement application
- Summary
- References
- An Integrated Application to Support the Implementation of Measurements and Data Analysis
- 18
- The Development of Fatigue Cracks in Metals
- Introduction
- Causes of fatigue cracks
- Models to describe fatigue cracks
- The development of fatigue cracks
- The effects of the fatigue cracks growth
- Summary
- References
- The Development of Fatigue Cracks in Metals
- 19
- Steering Kinematics and Turning Resistance Experimental Investigation of Articulated Rigid Body Vehicles
- Introduction
- Steering kinematics of articulated vehicles
- Test method and measuring stand
- Conclusions
- References
- Steering Kinematics and Turning Resistance Experimental Investigation of Articulated Rigid Body Vehicles
- 20
- Comparative Analysis of Methods for Determining Cyclic Properties of Metals
- Introduction
- Analytical characteristics of the hysteresis loop
- Test method
- Test results
- n’ and K’ material parameters
- Experimental verification of the analytical characteristics of the hysteresis loop
- Summary
- References
- Comparative Analysis of Methods for Determining Cyclic Properties of Metals
- 21
- Fatigue Damage Analysis of Offshore Structures using Hot-Spot Stress and Notch Strain Approaches
- Introduction
- Hot-spot and Notch Stresses Approaches
- Proposed Fatigue Methodologies Based on Hot-Spot and Notch Strain Approaches
- Application and Results
- Conclusions
- Acknowledgments
- References
- Fatigue Damage Analysis of Offshore Structures using Hot-Spot Stress and Notch Strain Approaches
- 22
- The Influence of Bonding System Type on Strength Properties of Reconstructed Teeth with 1st Class Cavities According to Black’s Classification
- Introduction
- Materials and Methods
- Results and Discussion
- Summary
- References
- The Influence of Bonding System Type on Strength Properties of Reconstructed Teeth with 1st Class Cavities According to Black’s Classification
- 23
- Multi-phase Magnetostrictive Actuator Dedicated to Close-Loop Vibration Control System
- Introduction
- Magnetostrictive exciters of mechanical vibration
- Construction of vibration level based on a multi-phase magnetostrictive actuator and the Heron system
- Remote object positioning using vibration
- Code of Structure Stiffness – CSS
- Further work directions – changes of the position of medical tools using programmable mechanical vibration.
- Conclusions
- References
- Multi-phase Magnetostrictive Actuator Dedicated to Close-Loop Vibration Control System
- back matter
- Keyword Index
- About the Editors
Usage statistics
Access count: 0
Last 30 days: 0 Detailed usage statistics |